Rutile flux-cored wire of T 19 9 L R / E308LT0 type designed for welding 1.4307 / 304L type stainless steels with very good corrosion resistance under fairly severe conditions, e.g. in oxidizing acids and cold or dilute reducing acids. Also suitable for welding stainless steels that are stabilized with titanium or niobium, such as 1.4541 / 321, 1.4878 / 321H and 1.4550 / 347 in cases where the construction will be operating at temperatures below 400°C. For higher temperatures, a niobium-stabilized consumable such as FOXcore 347-T0 is required. The scaling temperature is approximately 850°C in air. FOXcore 308L-T0 DG provides excellent weldability in flat as well as horizontal-vertical position. Great slag detachability and almost no spatter formation. Optimized to result in a shiny weld metal surface; also when welding with 100% CO2. Due to the slow freezing rutile slag, the weld metal shows very smooth bead appearance and low temper discoloration, which makes post-weld cleaning easier. Welding in vertical-up and overhead positions is preferably done using FOXcore 308L-T1.